Key points for installing anti-odor stainless steel floor drains

Trim the reserved drainage holes

Trim the reserved drainage holes to make them exactly match the purchased floor drain. Among them, the opening diameter of the floor drain cover plate is controlled at a certain distance to prevent the entry of sludge, particles and other contaminants.

2. Pay attention to the slope treatment

When installing the floor drain in a factory, special attention should be paid to properly handling the slope of the water flow. The general approach is to place the floor drain on the installation pipe and measure it to determine the size of the tile cutting. Next, cut the tiles, then fix the floor drain, lay the cut tiles around the floor drain, and then form the slope of the drainage.

3. Seal the edge seam of the floor drain tightly

After the floor drain is installed and fixed, it is necessary to pay attention to sealing the gaps on all four sides of the floor drain tightly with glass glue or other adhesives to ensure that the foul smell from the sewer cannot escape through the gaps.